逐步充填工件型腔的过程称为半固态合金熔体流变充型
发现最大充型长度取决于模具（或铸型）的冷却能力、半固态熔体自身的微观结构和流变特性以及成型工艺参数
给出了螺旋线型腔最大充型长度的估算公式
） 摘要： 半固态合金熔体直接浇入储料腔后
流变充型的微观过程包括其中液相的主动流变和固相的被动流变
可能出现均匀流变充型和分离流变充型两种形式
） Abstract： Rheologic filling of semisolid alloy melt is defined as a process in which the semisolid alloy melt poured into a die chamber is pressed into a mold cavity through a filling system including three basic units such as sprue, runner and gate by means of the rheologic properties of semisolid alloys
In the process, either of the solid phase and liquid phase in the alloy melts flows actively or passively so as to resulting to two basic phenomena: uniformity filling and discretely filling
Finally a series of theoretical models are obtained such as a critic condition to prevent from discretely filling, a mathematic model to evaluate the pressure lose in the filling process and the maximum length filled in a gyroidal mold specially used to evaluate the filling ability of alloys Keywords： Semisolid alloy, Rheologic filling, Processing theory 下载PDF阅读器 PDF全文下载： 初稿 （ 597 ） 作者简介： 通信联系人： 【收录情况】 中国科技论文在线： 邢书明
半固态合金流变成型工艺理论[EB/OL]
