当涡旋齿内外型线平行时法向齿厚等于全齿厚
通用型线
) 摘要: 研究通用型线的涡旋齿特征
研究表明:涡旋齿内外型线可用涡旋齿中线和齿厚分量表示
定义了涡旋齿法向齿厚、全齿厚和齿厚系数
) Abstract: The characteristic stduy of scroll wrap has been carried out based on general profile
The scroll machine’s pitch lines are classified as a-type and b-type
A-type pitch line forms orbitting scroll’ outer-line and fixed scroll’s inner-line
B-type pitch line forms orbitting scroll’s inner-line and fixed scroll’s outer-line
The normal wrap thickness, the all wrap thickness and the wrap thickness coefficient are defined
The calculation formula for two kinds of wrap thickness are obtained and recommendable value of minimum normal thickness for equal thickness scroll wrap is provided in common use
The study shows that the inner-line and out-line of scroll wrap can be expressed by the middle line and the component of scroll wrap, the normal thickness queal to the all thickness when the inner-line is parallel to the out-line, the wrap thickness coefficient can be determined by the volume ratio of scroll machine, the wrap thickness coefficient can be one of the essential parameters
Keywords: Scroll machine, general profile , thickness of scroll wrap 下载PDF阅读器 PDF全文下载: 初稿 ( 407 ) 作者简介: 通信联系人: 【收录情况】 中国科技论文在线: 强建国
基于通用型线的涡旋齿厚研究[EB/OL]
北京:中国科技论文在线
总览 评价 强建国 * ( 兰州理工大学机电工程学院
[2007-03-05]
http://www
paper
edu
cn/releasepaper/content/200703-48